tooling, prep & consumables
The boring gear that decides the floor.
Diamond tooling, surface prep gear, rollers, squeegees, mixing supplies, silica and aggregates. The consumables behind every floor, shipped nationwide from Exclusive Resin Supply.
what it is
Good product goes down badly without the right kit.
The flashy part of a floor is the coating. The part that decides whether it lasts is the prep and the tools. We stock the diamond tooling, the rollers and squeegees, the mixing gear, and the silica and aggregates that every system above relies on.
Skimp here and the best resin in the shop still fails. So we treat the consumables like they matter, because on the job they do.
A floor fails at the prep, not the pretty part.
where it shines
Where it earns its place.
Every system on this site lives or dies on the prep, and the prep lives on the tooling. The right diamond profile gives the coating something to bite. The right roller and squeegee put material down flat. The right mixing gear keeps your ratios honest so the resin cures like it should.
We keep this side of the shelf stocked because it is the side that gets forgotten until a floor fails. Order the consumables with the system so you are not three coats in and short a squeegee or a bag of broadcast sand.
A floor fails at the prep, not the pretty part.
in this line
Shop this line.
The tooling, prep and consumables products we stock and ship nationwide. Browse here, then check out in the shop or call the bench to spec your job.
tested before it ships
The owner’s read on it.
The tooling and consumables here are the gear the owner actually reaches for on a pour. Nothing on this shelf is filler.
pairs well with
What goes down with it.
questions from the bench
Spec & support
Why does prep matter so much?
Because a coating can only bond to a properly profiled slab. Bad prep is the root of most floor failures, no matter how good the resin is.
What tooling do I need to start?
It depends on your grinder and the slab. Tell us your machine and we will point you to the right diamond segments.
Do you carry silica and aggregates?
Yes, graded and kiln-dried for broadcast and texture across every system we sell.
Can I get the consumables with my order?
Yes, that is the idea. Order the system and the kit that goes with it in one go. Ask the bench.
Do you stock anti-slip additives?
We do. They add grip to a topcoat without ruining the finish. We will tell you how much to use.
rooted here
Tracy, California, and proud of it.
We are a member of the Lathrop Chamber of Commerce and we sponsor the kids who play here, from Lathrop Little League to the Junior Spartans. We ship to crews all over the country now, but every order still leaves this bench in the valley.
We ship coast to coast. This bench is still home.
Stock the way you work.
Three ways to buy from the shelf, from a single decorative job to a running shop account. Ordering and checkout run through our shop, so these are starting points, not a cart.
- Everything for a single pour
- Matched base, color and topcoat
- Owner walks you through it
- Ships nationwide, or pick up in Tracy
- Volume pricing across every line
- Priority on the bench
- First look at new systems
- Seat at the training academy
- Standing wholesale terms
- Custom flake blends to spec
- Stock held for your schedule
- Direct line to the owner
Tell us what you are pouring.
Questions on a product, a quantity, wholesale pricing, pickup, or training? Send a message and you will reach a person who has used what we sell.
- (209) 208-4656
- chris@exclusiveresins.com
- Tracy, CA 95304 · Ships nationwide
Putting down tooling, prep?
Talk to the owner about quantities, or browse the rest of the catalog.